AAS

ASCII Adjust AL After Subtraction

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
3F AAS A Invalid Valid ASCII adjust AL after subtraction.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA NA NA

Description

Adjusts the result of the subtraction of two unpacked BCD values to create a unpacked BCD result. The AL register is the implied source and destination operand for this instruction. The AAS instruction is only useful when it follows a SUB instruction that subtracts (binary subtraction) one unpacked BCD value from another and stores a byte result in the AL register. The AAA instruction then adjusts the contents of the AL register to contain the correct 1-digit unpacked BCD result.

If the subtraction produced a decimal carry, the AH register decrements by 1, and the CF and AF flags are set. If no decimal carry occurred, the CF and AF flags are cleared, and the AH register is unchanged. In either case, the AL register is left with its top four bits set to 0.

This instruction executes as described in compatibility mode and legacy mode. It is not valid in 64-bit mode.

Pseudo Code

IF 64-bit mode
	#UD;
ELSE
	IF ((AL AND 0FH) > 9) or (AF = 1)
		AL = AL - 6;
		AH = AH - 1;
		AF = 1;
		CF = 1;
		AL = AL AND 0FH;
	ELSE
		CF = 0;
		AF = 0;
		AL = AL AND 0FH;
	FI;
FI;

Flags Affected

The AF and CF flags are set to 1 if there is a decimal borrow; otherwise, they are cleared to 0. The OF, SF, ZF, and PF flags are undefined.

Exceptions

64-Bit Mode Exceptions

Exception Description
#UD If in 64-bit mode.

Compatibility Mode Exceptions

Same exceptions as protected mode.

Virtual-8086 Mode Exceptions

Same exceptions as protected mode.

Real-Address Mode Exceptions

Same exceptions as protected mode.

Protected Mode Exceptions

Exception Description
#UD If the LOCK prefix is used.