ANDPD

Bitwise Logical AND of Packed Double-Precision Floating-Point Values

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
66 0F 54 /r ANDPD xmm1, xmm2/m128 A Valid Valid Bitwise logical AND of xmm2/m128 and xmm1.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (r, w)

Description

Performs a bitwise logical AND of the two packed double-precision floating-point values from the source operand (second operand) and the destination operand (first operand), and stores the result in the destination operand.

The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register.

In 64-bit mode, using a REX prefix in the form of REX.R permits this instruction to access additional registers (XMM8-XMM15).

Pseudo Code

DEST[127:0] = DEST[127:0] BitwiseAND SRC[127:0];

Exceptions

SIMD Floating-Point Exceptions

None.

64-Bit Mode Exceptions

Exception Description
#UD If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#GP(0) If the memory address is in a non-canonical form. If memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory address referencing the SS segment is in a non-canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#UD If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#NM If CR0.TS[bit 3] = 1.
#GP If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#UD If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#SS(0) For an illegal address in the SS segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.