CVTPD2DQ

Convert Packed Double-Precision FP Values to Packed Dword Integers

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
F2 0F E6 CVTPD2DQ xmm1, xmm2/m128 A Valid Valid Convert two packed double-precision floating-point values from xmm2/m128 to two packed signed doubleword integers in xmm1.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (w)

Description

Converts two packed double-precision floating-point values in the source operand (second operand) to two packed signed doubleword integers in the destination operand (first operand).

The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register. The result is stored in the low quadword of the destination operand and the high quadword is cleared to all 0s.

When a conversion is inexact, the value returned is rounded according to the rounding control bits in the MXCSR register. If a converted result is larger than the maximum signed doubleword integer, the floating-point invalid exception is raised, and if this exception is masked, the indefinite integer value (80000000H) is returned.

In 64-bit mode, use of the REX.R prefix permits this instruction to access additional registers (XMM8-XMM15).

Pseudo Code

DEST[31:0] = Convert_Double_Precision_Floating_Point_To_Integer(SRC[63:0]);
DEST[63:32] = Convert_Double_Precision_Floating_Point_To_Integer(SRC[127:64]);
DEST[127:64] = 0000000000000000H;

Exceptions

SIMD Floating-Point Exceptions

Invalid, Precision.

64-Bit Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#GP(0) If the memory address is in a non-canonical form. If memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory address referencing the SS segment is in a non- canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#GP If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#SS(0) For an illegal address in the SS segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.