CVTTSS2SI

Convert with Truncation Scalar Single-Precision FP Value to Dword Integer

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
F3 REX.W 0F 2C /r CVTTSS2SI r64, xmm/m32 A Valid N.E. Convert one single-precision floating-point value from xmm/m32 to one signed quadword integer in r64 using truncation.
F3 0F 2C /r CVTTSS2SI r32, xmm/m32 A Valid Valid Convert one single-precision floating-point value from xmm/m32 to one signed doubleword integer in r32 using truncation.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (w)

Description

Converts a single-precision floating-point value in the source operand (second operand) to a signed doubleword integer (or signed quadword integer if operand size is 64 bits) in the destination operand (first operand). The source operand can be an XMM register or a 32-bit memory location. The destination operand is a general-purpose register. When the source operand is an XMM register, the single-precision floating-point value is contained in the low doubleword of the register.

When a conversion is inexact, a truncated (round toward zero) result is returned. If a converted result is larger than the maximum signed doubleword integer, the floating-point invalid exception is raised. If this exception is masked, the indefinite integer value (80000000H) is returned.

In 64-bit mode, the instruction can access additional registers (XMM8-XMM15, R8-R15) when used with a REX.R prefix. Use of the REX.W prefix promotes the instruction to 64-bit operation. See the summary chart at the beginning of this section for encoding data and limits.

Pseudo Code

IF 64-Bit Mode and OperandSize = 64
	DEST[63:0] = Convert_Single_Precision_Floating_Point_To_ Integer_Truncate(SRC[31:0]);
ELSE
	DEST[31:0] = Convert_Single_Precision_Floating_Point_To_ Integer_Truncate(SRC[31:0]);
FI;

Exceptions

SIMD Floating-Point Exceptions

Invalid, Precision.

64-Bit Mode Exceptions

Exception Description
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#UD If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE[bit 25] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#GP(0) If the memory address is in a non-canonical form.
#SS(0) If a memory address referencing the SS segment is in a non-canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#AC(0) If alignment checking is enabled and an unaligned memory reference is made.
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE[bit 25] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#GP If any part of the operand lies outside the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE[bit 25] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#SS(0) For an illegal address in the SS segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.