DAS

Decimal Adjust AL after Subtraction

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
2F DAS A Invalid Valid Decimal adjust AL after subtraction.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA NA NA

Description

Adjusts the result of the subtraction of two packed BCD values to create a packed BCD result. The AL register is the implied source and destination operand. The DAS instruction is only useful when it follows a SUB instruction that subtracts (binary subtraction) one 2-digit, packed BCD value from another and stores a byte result in the AL register. The DAS instruction then adjusts the contents of the AL register to contain the correct 2-digit, packed BCD result. If a decimal borrow is detected, the CF and AF flags are set accordingly.

This instruction executes as described above in compatibility mode and legacy mode. It is not valid in 64-bit mode.

Pseudo Code

IF 64-Bit Mode
	#UD;
ELSE
	old_AL = AL;
	old_CF = CF;
	CF = 0;
	IF (((AL AND 0FH) > 9) or AF = 1)
		AL = AL -6;
		CF = old_CF or (Borrow from AL = AL - 6);
		AF = 1;
	ELSE
		AF = 0;
	FI;
	IF ((old_AL > 99H) or (old_CF = 1))
		AL = AL - 60H;
		CF = 1;
	FI;
FI;
Example
SUB
AL, BL
Before: AL = 35H, BL = 47H, EFLAGS(OSZAPC) = XXXXXX
After: AL = EEH, BL = 47H, EFLAGS(0SZAPC) = 010111
DAA
Before: AL = EEH, BL = 47H, EFLAGS(OSZAPC) = 010111
After: AL = 88H, BL = 47H, EFLAGS(0SZAPC) = X10111

Flags Affected

The CF and AF flags are set if the adjustment of the value results in a decimal borrow in either digit of the result (see the "Operation" section above). The SF, ZF, and PF flags are set according to the result. The OF flag is undefined.

Exceptions

64-Bit Mode Exceptions

Exception Description
#UD If in 64-bit mode.

Compatibility Mode Exceptions

Exception Description
#UD If the LOCK prefix is used.

Virtual-8086 Mode Exceptions

Exception Description
#UD If the LOCK prefix is used.

Real-Address Mode Exceptions

Exception Description
#UD If the LOCK prefix is used.

Protected Mode Exceptions

Exception Description
#UD If the LOCK prefix is used.