FRNDINT

Round to Integer

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
D9 FC FRNDINT None Valid Valid Round ST(0) to an integer.

Description

Rounds the source value in the ST(0) register to the nearest integral value, depending on the current rounding mode (setting of the RC field of the FPU control word), and stores the result in ST(0).

If the source value is ∞, the value is not changed. If the source value is not an integral value, the floating-point inexact-result exception (#P) is generated.

This instruction's operation is the same in non-64-bit modes and 64-bit mode.

Pseudo Code

ST(0) = RoundToIntegralValue(ST(0));

FPU Flags Affected

C1: Set to 0 if stack underflow occurred. Set if result was rounded up; cleared otherwise. C0, C2, C3 are undefined.

Exceptions

Floating-Point Exceptions

Exception Description
#P Source operand is not an integral value.
#D Source operand is a denormal value.
#IA Source operand is an SNaN value or unsupported format.
#IS Stack underflow occurred.

64-Bit Mode Exceptions

Same exceptions as in protected mode.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Same exceptions as in protected mode.

Real-Address Mode Exceptions

Same exceptions as in protected mode.

Protected Mode Exceptions

Exception Description
#UD If the LOCK prefix is used.
#MF If there is a pending x87 FPU exception.
#NM CR0.EM[bit 2] or CR0.TS[bit 3] = 1.