MULPD

Multiply Packed Double-Precision Floating-Point Values

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
66 0F 59 /r MULPD xmm1, xmm2/m128 A Valid Valid Multiply packed doubleprecision floating-point values in xmm2/m128 by xmm1.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (r, w)

Description

Performs a SIMD multiply of the two packed double-precision floating-point values from the source operand (second operand) and the destination operand (first operand), and stores the packed double-precision floating-point results in the destination operand. The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register. See Figure 11-3 in the IntelĀ® 64 and IA-32 Architectures Software Developer's Manual, Volume 1, for an illustration of a SIMD double-precision floating-point operation.

In 64-bit mode, use of the REX.R prefix permits this instruction to access additional registers (XMM8-XMM15).

Pseudo Code

DEST[63:0] = DEST[63:0] * SRC[63:0];
DEST[127:64] = DEST[127:64] * SRC[127:64];

Exceptions

SIMD Floating-Point Exceptions

Overflow, Underflow, Invalid, Precision, Denormal.

64-Bit Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#GP(0) If the memory address is in a non-canonical form. If memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory address referencing the SS segment is in a non-canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#GP If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#SS(0) For an illegal address in the SS segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.