PANDN

Logical AND NOT

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
66 0F DF /r PANDN xmm1, xmm2/m128 A Valid Valid Bitwise AND NOT of xmm2/m128 and xmm1.
0F DF /r PANDN mm, mm/m64 A Valid Valid Bitwise AND NOT of mm/m64 and mm.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (r, w)

Description

Performs a bitwise logical NOT of the destination operand (first operand), then performs a bitwise logical AND of the source operand (second operand) and the inverted destination operand. The result is stored in the destination operand. The source operand can be an MMX technology register or a 64-bit memory location or it can be an XMM register or a 128-bit memory location. The destination operand can be an MMX technology register or an XMM register. Each bit of the result is set to 1 if the corresponding bit in the first operand is 0 and the corresponding bit in the second operand is 1; otherwise, it is set to 0.

In 64-bit mode, using a REX prefix in the form of REX.R permits this instruction to access additional registers (XMM8-XMM15).

Pseudo Code

DEST = ((NOT DEST) AND SRC);

Flags Affected

None. Numeric Exceptions None.

Exceptions

Numeric Exceptions

None.

64-Bit Mode Exceptions

Exception Description
#AC(0) (64-bit operations only) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#PF(fault-code) If a page fault occurs.
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#NM If CR0.TS[bit 3] = 1.
#UD If CR0.EM[bit 2] = 1. (128-bit operations only) If CR4.OSFXSR[bit 9] = 0. (128-bit operations only) If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#GP(0) If the memory address is in a non-canonical form. (128-bit operations only) If memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory address referencing the SS segment is in a non- canonical form.

Compatibility Mode Exceptions

Same as for protected mode exceptions.

Virtual-8086 Mode Exceptions

Exception Description
#AC(0) (64-bit operations only) If alignment checking is enabled and an unaligned memory reference is made.
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#NM If CR0.TS[bit 3] = 1.
#UD If CR0.EM[bit 2] = 1. 128-bit operations will generate #UD only if CR4.OSFXSR[bit 9] = 0. Execution of 128-bit instructions on a non-SSE2 capable processor (one that is MMX technology capable) will result in the instruction operating on the mm registers, not #UD. If the LOCK prefix is used.
#GP (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside of the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#AC(0) (64-bit operations only) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#PF(fault-code) If a page fault occurs.
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#NM If CR0.TS[bit 3] = 1.
#UD If CR0.EM[bit 2] = 1. 128-bit operations will generate #UD only if CR4.OSFXSR[bit 9] = 0. Execution of 128-bit instructions on a non-SSE2 capable processor (one that is MMX technology capable) will result in the instruction operating on the mm registers, not #UD. If the LOCK prefix is used.
#SS(0) If a memory operand effective address is outside the SS segment limit.
#GP(0) If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment.