PXOR

Logical Exclusive OR

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
66 0F EF /r PXOR xmm1, xmm2/m128 A Valid Valid Bitwise XOR of xmm2/m128 and xmm1.
0F EF /r PXOR mm, mm/m64 A Valid Valid Bitwise XOR of mm/m64 and mm.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (r, w)

Description

Performs a bitwise logical exclusive-OR (XOR) operation on the source operand (second operand) and the destination operand (first operand) and stores the result in the destination operand. The source operand can be an MMX technology register or a 64-bit memory location or it can be an XMM register or a 128-bit memory location. The destination operand can be an MMX technology register or an XMM register. Each bit of the result is 1 if the corresponding bits of the two operands are different; each bit is 0 if the corresponding bits of the operands are the same.

In 64-bit mode, using a REX prefix in the form of REX.R permits this instruction to access additional registers (XMM8-XMM15).

Pseudo Code

DEST = DEST XOR SRC;

Flags Affected

None. Numeric Exceptions None.

Exceptions

Numeric Exceptions

None.

64-Bit Mode Exceptions

Exception Description
#AC(0) (64-bit operations only) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#PF(fault-code) If a page fault occurs.
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#NM If CR0.TS[bit 3] = 1.
#UD If CR0.EM[bit 2] = 1. (128-bit operations only) If CR4.OSFXSR[bit 9] = 0. (128-bit operations only) If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#GP(0) If the memory address is in a non-canonical form. (128-bit operations only) If memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory address referencing the SS segment is in a non- canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#AC(0) (64-bit operations only) If alignment checking is enabled and an unaligned memory reference is made.
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#NM If CR0.TS[bit 3] = 1.
#UD If CR0.EM[bit 2] = 1. (128-bit operations only) If CR4.OSFXSR[bit 9] = 0. Execution of 128-bit instructions on a non-SSE2 capable processor (one that is MMX technology capable) will result in the instruction operating on the mm registers, not #UD. If the LOCK prefix is used.
#GP (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside of the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#AC(0) (64-bit operations only) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#PF(fault-code) If a page fault occurs.
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#NM If CR0.TS[bit 3] = 1.
#UD If CR0.EM[bit 2] = 1. (128-bit operations only) If CR4.OSFXSR[bit 9] = 0. Execution of 128-bit instructions on a non-SSE2 capable processor (one that is MMX technology capable) will result in the instruction operating on the mm registers, not #UD. If the LOCK prefix is used.
#SS(0) If a memory operand effective address is outside the SS segment limit.
#GP(0) If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment.