SUBPS

Subtract Packed Single-Precision Floating-Point Values

Opcodes

Hex Mnemonic Encoding Long Mode Legacy Mode Description
0F 5C /r SUBPS xmm1 xmm2/m128 A Valid Valid Subtract packed singleprecision floating-point values in xmm2/mem from xmm1.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:r/m (r) ModRM:reg (r, w)

Description

Performs a SIMD subtract of the four packed single-precision floating-point values in the source operand (second operand) from the four packed single-precision floating-point values in the destination operand (first operand), and stores the packed single-precision floating-point results in the destination operand. The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register. See Figure 10-5 in the IntelĀ®64 and IA-32 Architectures Software Developer's Manual, Volume 1, for an illustration of a SIMD double-precision floating-point operation.

In 64-bit mode, using a REX prefix in the form of REX.R permits this instruction to access additional registers (XMM8-XMM15).

Pseudo Code

DEST[31:0] = DEST[31:0] - SRC[31:0];
DEST[63:32] = DEST[63:32] - SRC[63:32];
DEST[95:64] = DEST[95:64] - SRC[95:64];
DEST[127:96] = DEST[127:96] - SRC[127:96];

Exceptions

SIMD Floating-Point Exceptions

Overflow, Underflow, Invalid, Precision, Denormal.

64-Bit Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE[bit 25] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#GP(0) If the memory address is in a non-canonical form. If memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory address referencing the SS segment is in a non-canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE[bit 25] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXMMEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#GP If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#UD If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 0. If CR0.EM[bit 2] = 1. If CR4.OSFXSR[bit 9] = 0. If CPUID.01H:EDX.SSE[bit 25] = 0. If the LOCK prefix is used.
#XM If an unmasked SIMD floating-point exception and CR4.OSXM MEXCPT[bit 10] = 1.
#NM If CR0.TS[bit 3] = 1.
#PF(fault-code) For a page fault.
#SS(0) For an illegal address in the SS segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.